do not scale from this print 0.800 .0315 (tol non-accum) "d" 6.25 .246 ref 0.30 .012 ref pin 60 pin 59 pin 2 pin 1 c c erm8-xxx-xx-x-d-ra-xx-tr no of positions -010,-011,-013, -020, -025 -030, -037, -040, -049, -050 -060, -070, -075 (per row) row specification -d: double (use erm8-xxx-01-d-ra) lead style -01: 1.58 [0.062] board -03: 2.36 [0.093] board plating specification -s: selective gold (use t-1mxx-01-s, t-1mxx-02-s) (see table 6) -l: light selective gold, matte tin tail (use t-1mxx-01-l, t-1mxx-02-l) (see table 6) -ra: right angle -tr : tape & reel (standard packaging) (see note 4) tape & reel option option -k: kapton pad (use k-500-300) -l: esd latches (see table 4 for availability) -ds: differential pair (hot swap)(see fig. 2 sht 5) (see table 4 for availability) 0.800 .0315 (tol. non-accum) "f" "b" 2.08 (typ) .082 (see note 6) 8.00 .315 ref 1.10 .043 ref 4.00 .157 ref 1.32 .052 ref "e" ref (alignment pin centers) pin 59 pin 1 pin 60 pin 2 c c c fig.1 (erm8-030-01-s-d-ra-l) c c l 5.01 .197 ref 5.75 ref .226 (typ) "a" ref 11.00 .433 ref 4.36 .172 ref "b" "c" (see note 6) c l c l erm8-xxx-01-d-ra c wt-35-xx-f (see table 6) wt-35-xx-f (see table 6) c 0.35 .014 ref 6.12 .241 (ref) 1.57 .062 ref "j" "h" 1.00 .039 ref 1.32 ref .052 c c c designed & dimensioned in millimeters [inches] notes: 1. represents a critical dimension. 2. burr allowance: .02[0.001] max. 3. minimum pushout /pullout force: signal: 2.22 n [.5 lb], latch and counterweight: 4.45 n [1 lb]. 4. for quantities up to 49 pieces, no leader, trailer, or eia-481-d reel to be supplied. for quantities from 50-124 pieces, no leader or trailer will be suppllied. 5. measure at bends. 6. applies to -l option only. 7. maximum cut burr on cut tails is 0.10[.004]. table 4 position -ds & -l option availability -010 -l -011 -l -013 -ds, -l -020 -l -025 -ds, -l -030 -l -037 -ds, -l -040 -l -049 -ds, -l -050 -l -060 -l -070 -l -075 -l sheet of unless otherwise specified, dimensions are in millimeters [inches]. tolerances are: decimals angles x.x: 0.3 [.01] 2 x.xx: 0.13 [.005] x.xxx: 0.051 [.0020] material: .80mm dual row right angle socket assembly by: erm8-xxx-xx-x-d-ra-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing c. pierce 8/17/2007 5 1 sheet scale: 2:1 insulator: lcp, color black contacts: phos bronze counterweight: brass latches: becu f:\dwg\misc\mktg\erm8-xxx-xx-x-d-ra-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision j
0.13 .005 6.38 .251 -k: kapton pad erm8-030-01-x-d-ra-l-k shown (use k-500-300) 6.00 .236 1.88 .074 "g" 0.020 (see table 3) 0.35 .014 ref 0.64 0.20 .025 .008 (ref) 0.17 .007 (both rows) 0.41 .016 (typ) 3.26 .128 5.01 .197 4.25 .167 (ref) 3.20 0.05 .126 .002 8.00 .315 2.23 .088 ref c c c c c c erf8-ra-xxx t-1r37-xx-t (see table 6) t-1m52-01-x t-1m52-02-x c see table 2 sheet of .80mm dual row right angle socket assembly by: erm8-xxx-xx-x-d-ra-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing c. pierce 8/17/2007 5 2 sheet scale: 8:1 revision j f:\dwg\misc\mktg\erm8-xxx-xx-x-d-ra-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
90 - 2 + 4 (typ) 1.40 .055 r 0.35 .014 (typ) 2.00 .079 (see note 5) c c c c 0.15 .006 (see note 5) 2.50 .098 c c t-1m52-02-x in process 5 (fill bottom row) (see sheet 2 for measurement detail) in-process 3 (pre-form terminal t-1m52-01-x & t-1m69-01-x) 3.26 .128 0.41 .016 cut-off carrier in process 6 (cut-off carrier) (see sheet 2 for measurement detail) c c 7.36 .290 0.65 .026 ref c in process 7 (fill erf8-ra-xxx) erf8-ra-xxx 90 1.40 .055 r 0.35 .014 in-process 1 (pre-form terminal t-1m52-02-x & t-1m69-02-x) j j j 90 3.15 .124 r 0.35 .014 c c c 9.99 .393 ref in-process 2 (form terminal t-1m52-02-x & t-1m69-02-x) t-1m52-02-x t-1m69-02-x t-1m69-01-x t-1m52-01-x r 0.35 .014 (typ) 90 (typ) 5.07 .199 in-process 4 (form terminal t-1m52-01-x & t-1m69-01-x) c c c sheet of .80mm dual row right angle socket assembly by: erm8-xxx-xx-x-d-ra-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing c. pierce 8/17/2007 5 3 sheet scale: 4:1 revision j f:\dwg\misc\mktg\erm8-xxx-xx-x-d-ra-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"d" wt-35-xx-f (see table 6) wt-35-xx-f (see table 6) c in process 11 (fill wt-35-xx-f) (version w/o -l option) (erm8-030-01-s-d-ra shown) 0.15 ref .006 2.23 ref .088 "d" in process 11 (fill wt-35-xx-f) (version with -l option) (erm8-030-01-s-d-ra-l shown) wt-35-xx-f (see table 6) c wt-35-xx-f (see table 6) 2.23 .088 ref "j" 8.00 .315 in process 12 (fill t-1r37-xx-t) (see table 6) t-1r37-xx-t (see table 6) c c 2.08 .082 (see note 6) c heat stake top row tails in process 9 (heat stake top row of contacts) (see sheet 2 for measurement detail) 4.25 .167 ref 3.20 0.05 .126 .002 0.17 .007 (see note 5) t-1m52-01-x c c in process 8 (fill top row) (see sheet 2 for measurement detail) 0.41 .016 5.01 .197 c c c in process 10 (cut-off of carrier) (see sheet 2 for measurement detail) cut-off carrier see table 2 sheet of .80mm dual row right angle socket assembly by: erm8-xxx-xx-x-d-ra-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing c. pierce 8/17/2007 5 4 sheet scale: 2:1 revision j f:\dwg\misc\mktg\erm8-xxx-xx-x-d-ra-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"a" "a" "b" "b" ground pin (ground pins must me in first and last positons) signal pins ground pin erm8-xxx-01-d-ra t-1m69-xx-x 0.62 .024 (ground pins) section "a"-"a" scale 3 : 1 c c c 3.200 .1260 1.35 .053 (signal pins) section "b"-"b" scale 3 : 1 c c fig. 2 erm8-025-01-x-d-ra-ds-l shown (different as shown, otherwise same as fig. 1) t-1m69-01-x t-1m69-02-x sheet of .80mm dual row right angle socket assembly by: erm8-xxx-xx-x-d-ra-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing c. pierce 8/17/2007 5 5 sheet scale: 2:1 revision j f:\dwg\misc\mktg\erm8-xxx-xx-x-d-ra-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
